Productive.NRW
Reducing the dependencies of North Rhine-Westphalia's economy and driving forward critical technologies with future potential in former coal regions - that is the aim of the "Produktives.NRW" funding call.
Industry in Europe and North Rhine-Westphalia is facing major new challenges. These relate in particular to expected economic adjustments in value chains and energy supply. At the same time, this opens up new prospects for strengthening economic sovereignty in a targeted manner and securing competitiveness in the long term. The aim of the Produktives.NRW funding program is therefore to reduce strategic dependencies in the European Union and North Rhine-Westphalia and at the same time to strengthen the production of critical technologies with considerable economic potential.
Strengthening critical technologies - promoting transformation
The call for funding supports the development and production of key and cutting-edge technologies as well as securing and strengthening the corresponding value chains.
This requires the establishment of production lines and new types of facilities as well as the expansion or conversion of existing facilities in key technology areas. This funding will therefore provide funds for the establishment, expansion and investment in the development or production of the following critical technologies:
- Digital technologies and technology-intensive innovations
- Environmentally friendly and resource-efficient technologies
- Biotechnologies

Förderbekanntmachung „Produktives.NRW", 3. Runde
Frequently asked questions
Companies based or with a branch in the Rhenish mining area (Aachen city region, Mönchengladbach city, Düren district, Heinsberg district, Rhine-Erft district and Neuss Rhine district) or the northern Ruhr region (Bottrop, Dorsten, Gladbeck and Marl). Companies wishing to establish a branch there are also eligible to apply.
The deadline for the first submission round was 01.10.2024. For the second submission round, the deadline is 02.12.2024. For the third submission round 03.02.2025.
The "Produktives.NRW" call provides for a one-stage selection procedure. Applications are submitted online via the EFRE.NRW.Online portal. Please make use of the advice offered by the NRW Innovation Promotion Agency in advance. Further information on the procedure can be found on the website www.in.nrw/massnahmen/produktives-nrw.
Find your contact person
Romy Sterthaus
Beratung Antragstellung / förderrechtliche Fragen
Bezirksregierung Münster für das nördliche Ruhrgebiet (Städte Bottrop, Dorsten, Gladbeck und Marl)
Domplatz 1–3
48143 Münster
Deutschland
Anja Farwick
Beratung Antragstellung / förderrechtliche Fragen
Bezirksregierung Münster für das nördliche Ruhrgebiet (Städte Bottrop, Dorsten, Gladbeck und Marl)
Domplatz 1–3
48143 Münster
Deutschland
Sarah Menzel
Beratung Antragstellung / förderrechtliche Fragen
Bezirksregierung Düsseldorf für das Rheinische Revier (ohne den Kreis Euskirchen)
Cecilienallee 2
40474 Düsseldorf
Deutschland
Linda Thieme
Beratung Antragstellung / förderrechtliche Fragen
Bezirksregierung Düsseldorf für das Rheinische Revier (ohne den Kreis Euskirchen)
Cecilienallee 2
40474 Düsseldorf
Deutschland
Ansprechpersonen bei der Innovationsförderagentur
Dr. Kamran Karim
Inhaltliche Beratung
Innovationsförderagentur.NRW
Wilhelm-Johnen-Straße
52428 Jülich
Deutschland
Rebecca Niemann
Innovationsförderagentur.NRW
Wilhelm-Johnen-Straße
52428 Jülich
Deutschland
Further links and downloads
Results
GLÜCK - Graphite and lithium recovery via environmentally friendly circular economy concepts
The project involves the construction of a state-of-the-art battery recycling plant for the NMC battery types that dominate the market (nickel, manganese and cobalt oxide cathode with graphite anode). The first phase focuses in particular on recovering the raw materials lithium and graphite from the black mass using the so-called OLiC (Optimized Lithium & Graphite Recovery) process.
RECOSIC -- Emission-reduced and resource-saving synthesis of raw SIC
The aim of the project is to build the world's first factory for silicon carbide (SiC) in the sense of a circular economy. Silicon carbide has many uses: it is used in technical ceramics, the abrasives industry and in the solar and electronics sector, as well as in modern composite materials and particle filters. Specialty and ultra-fine grades of the material are particularly in demand and are primarily used for ceramic applications. In an innovative process, by-products and waste products of different material qualities from SiC refinement to SiC synthesis are reprocessed in a recycling process. The factory is expected to produce up to 6,000 tons of raw silicon carbide per year in a particularly energy-efficient manner.
H2Bedburg
The project comprises the development of a hydrogen filling system consisting of a filling station for the direct refueling of commercial vehicles and buses as well as a trailer filling station. Special loading ramps allow the trailers to serve as an additional storage element during the loading phases. This reduces the need for stationary storage capacities and thus supports the production and use of green hydrogen. The project contributes to North Rhine-Westphalia's independence from hydrogen imports and to securing and strengthening the value chains in the hydrogen economy. The overall H2Bedburg project comprises a filling plant and a hydrogen production plant (electrolyzer) and has been recognized as an "anchor project for structural change in the Rhenish mining area". The production plant has already received a funding commitment from the state of NRW in the progres.NRW program.
MinPlus CTC plant - CO2-neutral exhaust gas cleaning additives and regenerative process steam for the Düren-Niderau industrial park
The aim of the project is to build an advanced plant for the production of the environmentally friendly Min-Plus additive at the Düren-Niederau Industrial Park site. The high-performance additive is made from residue sludge from waste paper recycling and is produced without residues or waste water. By using the MinPlus® additive, waste and biomass incineration plants can be optimized in such a way that the consumption of conventional and climate-damaging flue gas cleaning chemicals can be reduced and energy efficiency increased. In addition, the use of the additive enables improved control of deposits and corrosion damage, which increases the service life of the incineration plants.
The planned production volume of 65,000 tons per year is intended to replace at least the same amount of climate-damaging additives. At the same time, regenerative process steam can be provided for the Düren-Niederau industrial park.
BIOWASP-Biowerkstoffe – Bioweg GmbH, Elsdorf
Auf dem Campus von Pfeifer & Langen in Elsdorf soll eine Anlage zur Herstellung von biobasierten Materialien auf Basis bakterieller Cellulose entstehen. Eingesetzt werden innovative und (teil-)automatisierte bio-technologische Verfahren zur Herstellung nachhaltiger, biologisch ab-baubarer und leistungsstarker bakterieller Cellulose unter Nutzung der Synergiepotenziale des vorhandenen Produktionsstandorts (Abfall-ströme als Rohstoff, Abwärme und erneuerbarer Strom).
C4future2-Kunststoffabfälle – carboliq GmbH, Dormagen
In einer neuen Industrieanlage sollen gemischte Kunststoffabfälle im Chempark Dormagen mit einem neuen Verfahren verflüssigt werden, das weniger klimaschädlich ist als die bisherige Verbrennung. Außer-dem entsteht eine größere Menge des verwertbaren Flüssigprodukts CLR (Circular Liquid Resource), das der Petrochemie als vollwertiger Ersatz für fossile Rohstoffe (Erdöl oder Naphtha) bei der Herstellung von Basischemikalien für die Kunststoffproduktion dient.
DAC-2-Methanol – Greenlyte Carbon Technologies GmbH, Marl
In Marl soll erstmals eine vollständig integrierte und CO₂-neutrale Pro-duktion von eMethanol entstehen. Dafür sollen mithilfe einer innovativen Technologie jährlich 1.400 Tonnen CO₂ direkt aus der Umgebungsluft abgeschieden und zusammen mit 200 Tonnen grünem Wasserstoff (H₂) in einem integrierten Prozess zu jährlich bis zu 1.000 Tonnen eMethanol verarbeitet werden. Diese FOAK-Anlage am Standort Chemiepark Marl soll ab Ende 2026 in Betrieb genommen werden.
PET-Industrie – matterr GmbH (vormals RITTEC 8.0 Umwelttechnik GmbH), Hürth
Das Unternehmen plant den Bau einer ersten industriellen Anlage zur PET-Depolymerisation unter Verwendung der eigens patentierten Tech-nologie. Diese kann aus komplexen Abfallströmen jährlich bis zu 10.000 Tonnen PET-haltige Abfälle verarbeiten, die bisher zum Teil kaum recy-celbar waren. Das PET wird unter hohem Druck bei vergleichsweise niedrigen Temperaturen und ohne Zugabe von Lösemitteln nahezu vollständig zerlegt. Gereinigt und separiert können die Stoffe direkt in die Neuproduktion von PET eingebracht werden.
Railhub – Talbot Services GmbH, Stolberg
Die Talbot Services GmbH plant den Bau einer neuen Montage- und In-standhaltungshalle für Schienenfahrzeuge. Ziel ist die Aufbereitung und Modernisierung von Bestandsfahrzeugen. Dabei werden wertvolle Res-sourcen geschont und CO₂-Emissionen deutlich reduziert. Die Fahr-zeuge können länger eingesetzt werden, der ökologische Fußabdruck der Branche wird deutlich verringert. Mindestens 100 industrielle Ar-beitsplätze sollen geschaffen werden
UBRIS-Insektenlarven – Illucens GmbH
In dem Vorhaben sollen hochwertige Proteine und Fette auf Basis von Insektenlarven produziert werden. In einer vollautomatisch betriebenen und modular aufgebauten Produktionsanlage werden Junglarven mit or-ganischen Reststoffen gemästet. Die getrockneten Larven werden durch Pressen zu jährlich ca. 650 Tonnen Proteinmehl und 450 Tonnen Insek-tenöl verarbeitet. Durch die Aufwertung der anfallenden Rohstoffe kön-nen diese für den Stoffkreislauf aufbereitet und nutzbar gemacht wer-den.
Alle Fördermaßnahmen ansehen
Das EFRE/JTF-Programm NRW 2021–2027 fördert Projekte aus den Themenfeldern Innovation und Forschung, Gründung und Digitalisierung, Klimaschutz und Klimaanpassung, Stadt und Region, Transformation in Kohleregionen sowie Strategische Technologien. Finden Sie jetzt die passende Fördermaßnahme für Ihr Projekt!